TYM Tractor Dealer in Fort Collins, CO

BRAND & COMPANY

Who manufactures TYM tractors?

TYM (Tong Yang Moolsan) designs and builds TYM-branded tractors, with North American distribution and support through authorized dealers like Legacy Tractor Sales & Service in Fort Collins, CO.

Did TYM combine with Branson/Kukje?

Yes—TYM integrated Branson/Kukje operations, expanding the lineup and parts support available to U.S. owners.

What are TYM’s main tractor series in the U.S.?

Common ranges include Series 1 (sub-compact like the T25), Series 2 (compact like the T474), Series 3 (compact+ like the T574), and larger utility models above that; trims vary by model year.

Where can I get TYM parts and service in Northern Colorado?

Legacy Tractor Sales & Service stocks genuine TYM parts, performs diagnostics, and supports warranty and routine maintenance for customers across the Front Range.

Are TYM tractors good for Colorado’s climate and elevation?

Yes—properly sized models handle snow, elevation, and varied terrain; we match horsepower, cooling, and attachments to your specific property near Fort Collins.

LINEUP & SERIES OVERVIEW

Which TYM is best for 1–5 acres around Fort Collins?

Series 1 (e.g., T25) fits mowing, snow removal, garden tilling, and light loader work with tight maneuverability in neighborhoods and small acreages.

What should I choose for 5–20 acres with regular loader work?

Series 2 (T474) or Series 3 (T574) add chassis weight and hydraulic flow for grapples, forks, and 4–6 ft cutters common on Front Range acreages.

What transmissions are available on TYM tractors?

Hydrostatic (HST) for easy loader work, mechanical shuttle for simple durability, and power-shuttle on select models for frequent direction changes.

Are TYM loaders SSQA compatible?

Most modern TYM loaders use the Skid-Steer Quick Attach (SSQA) pattern for buckets, forks, and grapples—confirm the carrier on your specific loader.

Do I need a third-function to run a grapple?

Yes—a third-function adds a dedicated hydraulic circuit at the loader so the grapple opens and closes independently of lift/curl.

PRICING, PACKAGES & AVAILABILITY (USA)

How much does a TYM tractor cost in the U.S.?

Pricing depends on series/HP, cab vs. ROPS, and packages (loader, backhoe, implements). We provide itemized “out-the-door” quotes and current programs.

Do you offer tractor + implement bundles?

Yes—popular bundles include loader, mower, box blade, forks, and trailer sized to your property and tasks.

Can I try a TYM tractor before buying?

Yes—demos are available by appointment at Legacy Tractor Sales & Service in Fort Collins.

Do you deliver in Colorado or out of state?

Yes—delivery is available across Colorado, with regional/national transport options on request.

How quickly can I get popular models like T25, T474, or T574?

Availability varies by season and promotions; we check on-hand stock, pipeline units, and incoming shipments for your preferred build.

WARRANTY & SUPPORT (USA)

What warranty do new TYM tractors include?

New TYM tractors include comprehensive coverage with extended powertrain on many models; terms vary by model year and program.

Is the TYM warranty transferable?

Many models allow warranty transfer with proper documentation and within time/hour limits—verify by model and serial number.

What’s the difference between bumper-to-bumper and powertrain?

Bumper-to-bumper covers most systems except wear items; powertrain covers engine, transmission, and driveline under specified terms.

Do dealer services affect warranty?

Yes—pre-delivery inspection and scheduled maintenance create records that protect coverage and support resale value.

Will approved accessories void my warranty?

No—when installed to spec with proper fusing and routing. Improper wiring or overloading can jeopardize coverage.

OPERATION & ATTACHMENTS

What size rotary cutter should I choose?

Match cutter width to PTO horsepower and tractor weight: many compacts use 4–6 ft; utility models can step up to wider or batwing cutters.

Which tire tread is best (R1, R4, R14, Turf)?

R14 is a popular hybrid for mixed turf/dirt; R1 maximizes traction in soil; R4 suits loader/yard work; Turf protects lawns.

How important is rear ballast for forks or a grapple?

Critical—use a rear implement, wheel weights, or liquid ballast to protect the front axle and increase stability and braking.

Can compact TYM models run flail or finish mowers?

Yes—size the implement to PTO horsepower and mowing conditions, and operate at rated PTO speed for best cut quality.

Do I need chains for winter work on the Front Range?

Often helpful—R14s or Turf tires with chains improve snow traction; we’ll size chains to your tire and terrain.

MAINTENANCE & TROUBLESHOOTING

What are typical service intervals on TYM models?

Follow hour-based intervals for engine oil/filter, fuel/air filters, hydraulic/HST filters, and coolant as listed in your operator’s manual.

Can I use synthetic oil?

Yes—use oils that meet TYM/engine-maker specifications for the engine and hydraulic systems.

Hydraulics feel weak—what should I check first?

Verify fluid level/condition, replace clogged filters, reseat quick-couplers, and operate near rated RPM; then test relief pressure if needed.

PTO won’t engage—what are common causes?

Confirm PTO switch/lever and safety interlocks; check driveline length and angles; if still inop, schedule diagnostics.

No-start after storage—what should I do?

Test battery and grounds, inspect fuses/switches, refresh stale fuel and filters, and verify seat/neutral interlocks are closing.

SPECS & DIMENSIONS

What does 3-point lift “at 24 inches” mean?

It’s the lift capacity measured 24 inches behind the ball ends—use this figure to size most rear implements correctly.

Will a cabbed tractor fit under an 82-inch garage door?

Many will, but overall height varies by tires and model—measure the opening and confirm the tractor’s height before purchase.

What’s the turning radius on compact TYM tractors?

Compacts are designed for tight turning in barns and corrals; the exact radius depends on axle and tire configuration.

How do I size a PTO generator?

Plan roughly ~2 HP per kW as a rule of thumb, then confirm with the generator manufacturer and your electrician.

What tiller width fits compact TYM models?

Match tiller width to the tractor’s tire track and soil conditions; confirm gearbox rating and blade count against your PTO horsepower.

TRANSPORT & STORAGE

What trailer do I need for a compact with loader?

Many owners choose a 7k–10k GVWR tandem with brakes; always calculate total weight (tractor + loader + ballast + implements).

How do I tie down safely for highway travel?

Use rated chains/binders on all four corners, secure the loader or grapple, and re-check tension after a few miles.

Best practices for winter storage on the Front Range?

Stabilize fuel, maintain the battery, verify coolant protection, grease zerks, and protect wiring from rodents.

Should I store with implements attached?

Ideally, set heavy implements on stands, relieve hydraulic pressure, and park on level ground.

How do I purge air after reconnecting loader hoses?

Cycle all functions through full motion at working RPM; reseat couplers if motion is jerky and retest.

FINANCING & PROMOTIONS (USA)

Are 0% or seasonal promotions available?

Yes—factory programs vary by series and time of year; we’ll confirm current APR, cash, and bundle incentives.

Can I finance implements with the tractor?

Often yes—many retail programs allow implements to be included in the same contract.

Do lenders finance used TYM tractors?

Often yes, subject to age, condition, and program availability; we’ll outline options for your machine.

Can I lock a rate while waiting for delivery?

Program rules differ; we’ll explain the timing and documentation required for your order.

Do trade-ins affect promotional pricing?

They can—trade value, cash programs, and financing interact; we show the combinations on a written quote.

TRADE-IN & PRE-OWNED

Can I trade in or consign my tractor?

Yes—trades and consignments are available after on-site verification of hours, condition, and records.

What should I check when buying used?

Inspect for hydraulic leaks, loader pin wear, steering play, PTO engagement, 4WD function, tire condition, and test under load.

Do you offer remote appraisals?

Yes—send photos, hours, and notes for a conditional estimate pending in-person verification.

Will service records improve resale value?

Absolutely—documented maintenance, correct fluids, and proper storage help valuation.

Can you help source a specific used TYM model?

Yes—we monitor incoming trades and regional inventory; tell us the series, horsepower, and must-have features.

SAFETY & OPERATION

How do I operate safely on slopes near the foothills?

Use low range, keep loads low, wear the seatbelt with ROPS up, and avoid sidehill turns; slow down on uneven ground.

What does differential lock do and when should I use it?

It locks both rear wheels for traction at low speed; engage while moving straight and release before tight turns on firm surfaces.

Is HST “whine” normal?

Some hydrostatic noise under load is normal; excess heat or noise suggests fluid/filter attention and inspection.

Should I mow at rated PTO speed?

Yes—use the rated PTO speed (commonly 540 RPM) for blade tip speed and adjust ground speed for cut quality.

Why is loader ballast so important?

Ballast protects the front axle, improves traction and braking, and stabilizes steering—especially with forks or a grapple.

SERIES-SPECIFIC (T25 • T474 • T574 • UTILITY)

T25 vs larger compacts—who should pick T25?

Choose T25 for tight spaces, lawns, and light loader/snow work on 1–5 acre properties where maneuverability matters most.

Will a T25 handle a front snowblower in Fort Collins?

Yes—when equipped with the correct mid-PTO and sub-frame kit sized to the unit and your snowfall.

T474 vs T574—how do I choose?

T574 adds weight, hydraulic flow, and implement capacity over T474; pick by grapple weight, cutter width, and terrain.

Can a T474 run a 5-ft rotary cutter?

Often yes—match to PTO horsepower and vegetation density, and ballast properly for hills and uneven ground.

When should I step into a utility TYM?

Move to utility class when you need more PTO power, heavier frames, and multiple rear remotes for hay tools and commercial tasks.

LOCAL DEALERSHIP SERVICES (FORT COLLINS)

Do you stock TYM filters and common parts?

Yes—we carry common filters and maintenance parts and can special-order model-specific components quickly.

Can you install third-function kits and lighting?

Yes—dealer-installed kits mount cleanly with proper fusing and wiring for reliable operation.

Do you help with implement setup and ballast?

Absolutely—we set quick-hitch geometry, ballast plans, hydraulic connections, and safety checks for your implements.

Do you offer pickup, delivery, or field service?

Yes—shop transport and field support options are available depending on the issue and location.

How do I reach Legacy Tractor Sales & Service?

📍 1845 N College Ave, Fort Collins, CO 80524 · 📞 (970) 482-4803 · LegacyTractors.com