LS MT242H

Current LS TRactor
Promotions

Frequently Asked Questions
LS MT242H

What is the LS MT242H and who is it built for?

The LS MT242H is a 42.5 horsepower open-station ROPS compact tractor powered by a 4-cylinder Yanmar CRDI diesel engine. It delivers the same engine, loader, and hydraulic capability as the MT242HC cab model without the enclosed cab — making it the right choice for Colorado property owners who prefer open-air operation or want maximum horsepower at a lower cost. With 34.8 PTO HP, 2,506 lbs of loader lift, and HST transmission with cruise control, it is built for serious 10 to 50 acre work. Available at Legacy Tractors in Fort Collins, Colorado.

Does the MT242H have a DPF?

Yes. The MT242H is equipped with a Diesel Particulate Filter (DPF) as part of its Tier 4 emissions compliance. The TF-LCD instrument panel displays regeneration time so you can monitor DPF status during operation. At Colorado elevations above 5,000 feet, DPF regeneration cycles may occur more frequently depending on load conditions. Operating the tractor under load regularly allows passive regeneration and reduces the need for manual regen cycles. Avoid sustained low-load idling. A block heater — available as an option — is strongly recommended for Colorado winters to support cold starts and reduce regen frequency. Contact Legacy Tractors for high-altitude DPF guidance specific to your operation.

How much can the MT242H lift?

The MT242H delivers 2,506 lbs of front loader lift capacity using the LL3303 loader — identical to the cab model MT242HC. The 3-point hitch lifts 1,808 lbs at the hitch end on a Category I hitch with hydraulic position control. Bucket digging force is 3,663 lbs and backhoe digging depth is 97.2 inches. The 4-point loader mount structure provides added stability under heavy loads. The E/G RPM interlocking switch on the joystick allows you to momentarily boost engine RPM for faster loader speed and lift even when operating at low RPM.

What is the difference between the MT242H and MT242HC?

The MT242H and MT242HC share the same engine, transmission, loader, hydraulics, and implement capability. The difference is the operator environment. The MT242HC adds a factory-enclosed cab with heat, air conditioning, front and rear wipers, Bluetooth radio with USB, full LED work lighting front and rear, operator entry/exit escort lamps, side mirror, room mirror, tilting steering wheel, and beacon harness pre-wiring. The MT242H has none of those cab features — it is an open ROPS station. As a result, the MT242H weighs 467 lbs less (3,338 vs 3,805 lbs), has a slightly smaller fuel tank (10.6 vs 11.4 gal), sits taller at 95 inches ROPS height versus 90 inches cab height, and is typically lower in cost. For operators who work in mild weather or already have cab options on other equipment, the MT242H delivers the same raw capability at a lower investment.

What implements work best with the MT242H?

With 34.8 PTO horsepower, the MT242H handles a 7-foot finish mower comfortably and a 6-foot rotary cutter at full capacity. It is well-suited for hay operations including baler and rake, loader work, post hole digging, box scraping, and snow removal with a front push blade. The 2,506 lb loader lift handles gravel, compost, bale moving, and general farm material without difficulty. The mid PTO option — specified at purchase — allows compatibility with mid-mount implements if needed.

What transmission does the MT242H use?

The MT242H uses a Hydrostatic Drive (HST) transmission with 3 ranges — Low, Mid, and High. There is no clutch pedal for direction changes. Cruise control with linked pedal is standard, meaning engine RPM automatically matches your forward and reverse HST pedal input. This reduces fatigue significantly during repetitive loader and implement work across a full operating day.

What tires come on the MT242H?

The MT242H offers four tire options: Ag (7-14 front / 11.2-24 rear) for field and pasture traction, Industrial (27×8.50-15 front / 43×16.00-20 rear) for loader work and mixed-terrain stability, Versa Turf (27×8.50-15 front / 43×16.00-20 rear) for a balance of traction and turf protection, and Turf (25×8.50-14 front / 41×14.00-20 rear) for minimal ground disturbance on irrigated pasture and finished areas. Contact Legacy Tractors to confirm availability of your preferred tire type.

What financing is available on the MT242H at Legacy Tractors?

Legacy Tractors offers competitive financing on LS tractor models including the MT242H. Contact Legacy Tractors directly at (970) 482-4803 or visit LegacyTractors.com for current rates, cash incentives, and promotional financing on qualifying purchases.

Owners Manual:
LS MT242H