For more images, click arrow on the side of the above photo.
LS MT240HE
![]() |
|||
| 2,153Lbs | 1,808 Lbs | 40 | 32 |
The LS MT240HE delivers 40 HP from the same turbocharged LS L3C19-T CRDI diesel as the MT240E — paired with a dual-pedal, 3-range HST and cruise control instead of a clutch pedal. 2,153 lb. loader lift, 1,808 lb. Category I 3-point hitch, fender-mounted joystick standard, mechanical 4WD, independent 540 PTO, foldable ROPS, and full DPF/DOC Tier 4 compliance. This is 40 HP built for the operator who’s cycling a loader all day, running a snowblower on a Colorado slope, or simply doesn’t want to think about a gearbox.
If you’re comparing this to the MT240E, here’s the honest trade: the HST costs you 2 PTO HP — 32 versus 34 — and gains you clutch-free operation, cruise control, and a joystick that comes standard. For loader work and snow removal, most buyers won’t feel those 2 PTO HP. For heavy rotary cutting all day, they might. Choose the MT240HE if the transmission is what’s going to wear you out. Choose the MT240E if maximum PTO output is what the work demands. Visit our dealership or contact us today for details.
Frequently Asked Questions
LS MT240HE
What is the LS MT240HE and who is it built for?
The MT240HE is the highest-horsepower open-station HST tractor in the LS MT2E Series — 40 gross HP and 32 PTO HP from a turbocharged L3C19-T 3-cylinder CRDI diesel engine paired with a dual-pedal, 3-range hydrostatic transmission and cruise control. It is built for Colorado property owners who want maximum open-station horsepower without a clutch pedal — frequent loader cycling, snowblower operation, grading, and heavy implement work where pedal-free speed control reduces fatigue over long sessions. Available exclusively at Legacy Tractors in Fort Collins, the only LS dealer in Northern Colorado. Call (970) 482-4803.
What is the real difference between the MT240HE and the MT240E?
These two tractors share the same turbocharged L3C19-T engine, the same 40 gross HP rating, identical loader lift (2,153 lbs), identical hydraulic flow (13.7 GPM total), identical dimensions, and the same fuel tank. The difference is the transmission and what it costs you in PTO horsepower. The MT240HE uses a dual-pedal 3-range HST with cruise control — no clutch pedal, infinite ground speed within each range, and smooth direction changes with foot pressure alone. The MT240E uses a Synchro Shuttle F12 x R12 with a clutch pedal and 12 discrete forward speeds. That HST convenience costs 2 PTO HP — 32 HP on the MT240HE vs 34 HP on the MT240E. For continuous loader work, snow removal, and frequent forward-reverse cycles, the MT240HE is the more comfortable choice. For heavy sustained PTO implement work — running a rotary cutter or tiller for hours — the MT240E’s 2 extra PTO HP and gear-drive efficiency give it the edge.
Is 40 HP enough for Colorado property work above 5,000 feet?
Diesel engines lose approximately 3% of rated horsepower for every 1,000 feet of elevation above sea level. At Fort Collins (approximately 5,000 ft), the MT240HE produces approximately 34 HP under real working conditions. At 7,000 ft, expect closer to 29 HP. The MT240HE’s turbocharged L3C19-T engine partially compensates for altitude-related power loss — the turbocharger helps maintain intake air density at elevation in ways a naturally aspirated engine cannot. For Colorado property owners working at elevations above 6,000 ft, the MT240HE’s turbo advantage over the MT235HE (35 HP naturally aspirated, approximately 29 HP at 5,000 ft) becomes more meaningful with every additional thousand feet. Contact Legacy Tractors at (970) 482-4803 to discuss your specific elevation and use case.
How does the HST transmission work on the MT240HE — is it easy to use?
The MT240HE uses a dual-pedal hydrostatic transmission with three range selections — low, medium, and high. The right pedal controls forward speed and the left pedal controls reverse speed; pressing either pedal harder increases speed in that direction, releasing it slows and stops the tractor. There is no clutch pedal. Cruise control is standard, which allows you to set a consistent ground speed without holding the pedal — especially useful for finish mowing, snowblowing, or any pass-work application. The fender-mounted joystick for the front-end loader is also standard, keeping your hand close and your focus on the bucket. If you have operated a zero-turn mower or any other hydrostatic machine, the MT240HE will feel immediately familiar.
What implements can the MT240HE run?
With 32 PTO HP, the MT240HE handles a 72-inch finish mower, 6-foot rotary cutter, 74-inch snowblower (LS LW3174B is purpose-matched to this tractor), tiller, box blade, rear blade, post hole digger, baler, and rake. The optional mid-PTO at 2,000 RPM must be specified at the time of purchase — it cannot be added after delivery. The loader LL3302 provides 2,153 lbs of lift at the pivot pin with a 66-inch bucket, a maximum lift height of 94 inches, and a breakout force of 3,579 lbs. One pair of remote valves is included as standard equipment on the MT240HE, giving you hydraulic control of a rear implement without an additional option package.
Does the MT240HE have a DPF, and how do I manage it?
Yes. The MT240HE is Tier 4 Stage V compliant with both a Diesel Particulate Filter (DPF) and Diesel Oxidation Catalyst (DOC). Under normal working conditions the DPF self-manages through passive regeneration as long as the engine is running under load at RPM above approximately 1,700. The three rules to follow: do not shut the engine off during an active regeneration cycle, avoid extended low-load idling, and operate at working RPM rather than lugging the tractor at low speed. At Colorado elevations above 5,000 ft, passive regen cycles may occur more frequently under light-load conditions — the fix is the same as always, keep the engine under load and RPM up. Contact Legacy Tractors at (970) 482-4803 for high-altitude DPF guidance specific to your property.
How does the MT240HE compare to the MT235HE?
Both are open-station HST tractors with dual-pedal 3-range transmissions and cruise control, but the MT240HE steps up meaningfully in power. The MT240HE delivers 40 gross HP and 32 PTO HP from a turbocharged engine, while the MT235HE produces 35 gross HP and 28 PTO HP from a naturally aspirated engine. At sea level that is a 5 HP and 4 PTO HP difference. At Colorado’s typical working elevations, the MT240HE’s turbocharger partially compensates for altitude power loss, widening the real-world performance gap further. Both tractors share the same loader lift (2,153 lbs), hitch capacity (1,808 lbs), and hydraulic flow (13.7 GPM total). If your property demands serious rotary cutting, heavy snowblower operation, or elevation above 6,000 ft, the MT240HE is the right open-station HST choice.
What are the financing options for the MT240HE at Legacy Tractors?
Legacy Tractors offers several financing programs on MT2E models. Current options include 2.99% for 120 months on select MT2E models and up to $8,000 cash rebate on qualifying cash purchases. Additional LS programs may include 0% financing promotions on select models. Contact Legacy Tractors at (970) 482-4803 or visit LegacyTractors.com for current rates, availability, and to confirm which offers apply to the MT240HE.
Owners Manual:
LS MT240HE
Customize Your
LS Tractor Package
"*" indicates required fields
Financing
Fast, Secure & Confidential Online Finance Application

LEGACY TRACTOR SALES & SERVICE, INC.
1845 North College Avenue • Ft. Collins, CO 80524
(970) 482-4803 • info@legacytractors.com






