LS MT240E

Current LS TRactor
Promotions

Frequently Asked Questions — LS MT240E

What is the LS MT240E and who is it built for?

The MT240E is the highest-horsepower open-station tractor in the LS MT2E Series, delivering 40 gross HP and 34 PTO HP from a turbocharged L3C19-T 3-cylinder CRDI diesel engine. It is built for Colorado property owners running 15–30 acres who need the top end of the MT2E lineup without a factory cab — heavy rotary cutting, large snowblower operation, substantial loader work, and running oversized implements that would tax a 35 HP machine. Available exclusively at Legacy Tractors in Fort Collins, the only LS dealer in Northern Colorado.

How does the MT240E’s turbocharged engine perform at Colorado’s elevation?

This is one of the most important specs to understand for Colorado buyers. Diesel engines lose approximately 3% of horsepower for every 1,000 feet of elevation above sea level. At Fort Collins (approximately 5,000 ft), expect roughly 85% of rated power — putting the MT240E at approximately 34 HP under real working conditions at that elevation. Compared to the naturally aspirated MT235E (35 HP rated, ~29.75 HP at 5,000 ft), the MT240E’s turbocharger partially compensates for altitude-related power loss, giving you a meaningful edge when you are running a rotary cutter or snowblower at elevation. At 7,000–8,000 ft the advantage grows further. Contact Legacy Tractors at (970) 482-4803 to discuss your specific elevation and application.

What is the difference between the MT240E and the MT235E?

Both tractors share the same L3C19-T engine family and the same Synchro Shuttle F12 x R12 transmission, but the MT240E is turbocharged and produces 40 gross HP versus the MT235E’s 35 HP — a 5 HP difference that adds up quickly at altitude or under heavy implement load. PTO horsepower rises from 29.7 HP (MT235E) to 34 HP (MT240E), which matters when running a 6′ rotary cutter or a 74″ snowblower. Loader lift is identical at 2,153 lbs on both models. The MT240E weighs a few more pounds (2,881 vs 2,866 lbs) but shares the same dimensions, wheelbase, tire options, and hydraulic flow. If you are consistently pushing the MT235E’s limits with heavy PTO implements or working above 6,000 ft, the MT240E is the open-station answer.

What transmission does the MT240E use — is it HST or Synchro Shuttle?

The MT240E uses a Synchro Shuttle transmission with 12 forward and 12 reverse speeds — not HST. This is the same gear-drive Synchro Shuttle used throughout the open-station MT2E lineup. A clutch pedal is required for gear changes; the shuttle lever handles forward and reverse direction changes without needing to go through neutral. This transmission is well suited for mixed-use work: PTO implements, grading, loader cycles with periodic direction changes. If you want pedal-free operation for heavy continuous loader cycling, the MT240HE is the HST variant — but you trade 6 PTO HP (34 vs 28) in exchange for that convenience. For most Colorado property work involving a mix of tasks, the Synchro Shuttle is the stronger all-around choice.

What implements can the MT240E run?

With 34 PTO HP, the MT240E is capable of running a 72″ finish mower, a 6′ heavy-duty rotary cutter, a 74″ snowblower (LS LW3174B is purpose-matched to this tractor), a tiller, box blade, rear blade, post hole digger, baler, and rake. The optional mid-PTO at 2,000 RPM must be specified at the time of purchase — it cannot be added after delivery. The loader LL3302 provides 2,153 lbs of lift with a 66″ bucket, a max lift height of 94 inches, and a breakout force of 3,579 lbs.

Does the MT240E have a DPF?

Yes. The MT240E is Tier 4 Stage V compliant with both a Diesel Particulate Filter (DPF) and Diesel Oxidation Catalyst (DOC). Under normal working conditions the DPF self-manages through passive regeneration as long as the engine is running under load at RPM above approximately 1,700. The key rules: do not shut the engine off during an active regeneration cycle, avoid extended low-load idling, and operate at working RPM rather than letting the tractor lug at low speed. At Colorado elevations above 5,000 ft, regen cycles may occur more frequently under light-load conditions. For guidance specific to your elevation and use case, contact Legacy Tractors at (970) 482-4803.

How does the MT240E compare to the MT232E in real-world use?

The MT240E produces 40 HP and 34 PTO HP versus the MT232E’s 31.7 HP and 28.5 PTO HP — roughly 8.3 HP more gross and 5.5 more PTO HP. The MT232E’s loader lift is actually higher at 2,506 lbs versus the MT240E’s 2,153 lbs, because the MT232E uses the LL3303 loader while the MT240E uses the LL3302. So if pure loader lift capacity is your priority, the MT232E wins. If you need more engine and PTO power — running a larger rotary cutter, pushing more snow, or working at higher elevation — the MT240E is the better fit. Both are open-station Synchro Shuttle tractors available at Legacy Tractors in Fort Collins.

What are the financing options for the MT240E at Legacy Tractors?

Legacy Tractors offers several financing programs on MT2E models. Current options include 2.99% for 120 months on select MT2E models and up to $8,000 cash rebate on qualifying cash purchases. Additional LS programs may include 0% financing promotions on select models. Contact Legacy Tractors at (970) 482-4803 or visit LegacyTractors.com for current rates, availability, and to confirm which offers apply to the MT240E.

Owners Manual:
LS MT240E